The installation location is inappropriate.
Solutions
Place the printer on a
at
surface and operate in the recommended environmental conditions.
& “Environmental Specications” on page 271
Unsupported paper is being used.
Solutions
Use paper supported by this printer.
& “Available Paper and Capacities” on page 239
& “Unavailable Paper Types” on page 241
Paper handling is inappropriate.
Solutions
Follow paper handling precautions.
& “Paper Handling Precautions” on page 29
Too many sheets are loaded in the printer.
Solutions
Do not load more than the maximum number of sheets specied for the paper.
& “Available Paper and Capacities” on page 239
The paper settings on the printer are incorrect.
Solutions
Make sure the paper size and paper type settings match the actual paper size and paper type loaded in the
printer.
& “Paper Size and Type Settings” on page 29
Paper slips when paper dust adheres to the roller.
Solutions
Clean the roller.
& “Cleaning the Paper Path for Paper Feeding Problems” on page 109
Paper Feeds at a Slant
e
following causes can be considered.
The installation location is inappropriate.
Solutions
Place the printer on a at surface and operate in the recommended environmental conditions.
& “Environmental Specications” on page 271
Solving Problems
>
The Printer Does Not Work as Expected
>
Paper Does Not Feed Properly
135
To Next Page
Loading...
