REV.-A
Are the characters aligned vertically?
NO -+ GO TO STEP 6.
YES
~
GO TO STEP 7.
3. Refer to the odd-numbered lines (Ist and 3rd), and adjust the even-numbered lines (2nd and 4th).
* If the even-numbered lines are shifted o the right:
e
Press the LOAD/EJECT button once while pressing the ALT button.
(The reference value increases + 1 and even lines shift to the left.
*
If the even-numbered lines are shifted to the left:
+=
Press the LF\FF button once while pressing the ALT button.
(The reference value decreases – 1 and even lines shift to the right.)
4. Press the
ALT,LF/FF, and LOAD/EJECT buttons at the same time.
5. The printer enters
LQ
mode, and the printer prints the reference value and the “l” characters for
4 lines.
Are the characters aligned vertically?
NO
a
GO TO STEp 6.
YES
-+ GO TO STEP 7.
6. Refer to the odd-numbered lines (1st and 3rd), and adjust the even-numbered lines (2nd and 4th).
* If the even-numbered lines are shifted to the right:
~
Press the LOAD/EJECT button once while pressing the ALT button.
(The reference value increases +
1
and even lines shift to the left.)
* If the even-numbered lines are shifted to the left:
~
Press the LF/FF button once while pressing the ALT button.
(The reference value decreases – 1 and even lines shift to the right.)
7. Turn printer power off.
4-5
To Next Page
Loading...
