Epson LQ 300 - Page 12

Product Description
LQ-300 Service Manual
Table 1-3. Feeding Speed
Lever Position Feeding 1/6 inch Line Feed Continuous Feed
Friction
Max. 94 ins/line
Max 3.6
incheslsec.
o, 1
Tractor
Typ. 80 ins/line (*)
Typ. 3.3 incheshec (*)
Min. 75 ins/line Min. 2.8
inchhec.
I Friction
I I
2-5
Max. 106 redline Max. 2.8 incheslsec.
Tractor
Typ. 104 ins/line (*)
Typ. 2.5 inche.shec.’
Min 94 m.s/line Min. 2.2 incheskec.
* Feed speed is varies depending on the motor driving voltage.
1.2.1.2 Paper Specifications
Table 1-4. Specifications for Cut Sheet Paper (CSF)
Width
182 mm -216 mm (7.2 in. -8.5 in.)
Length
210 mm -364 mm (8.3 in. -14.3 in.)
Thickness
10.07 mm -0.12 mm (0.0028 in. -0.0047 in.)
I
Weight
64-90
g/m2 (18 -24 lb.)
Qualitv Plain oaDer. recvcled DaDer
Table 1-5. Specifications for Cut Sheet Paper (Manual Insertion)
Width
148 mm -257 mm (5.8 in. -10.1 in.)
Length
182 mm -364 mm (7.2 in. -14.3 in.)
Thickness
0.065 mm -0.14 mm (0.0025 in. -0.0055 in.)
Weight
52.3-90
g/m2 (14 -24 lb.)
Quality
I Plain paper, recycled paper
Table 1-6. Specifications for Envelopes
Size
No. 6
Width x Length: 166 mm x 92 mm (6.5 in. x 3.6 in.)
No. 10 Width x Length: 240 mm x 104 mm (9.5 in. x 4.1 in.)
Thickness
0.16 mm - 0.52 mm (0.0063 in. - 0.0197 in.)
Weight
45- 91 g/m2 (12 -24 lb.)
Quality Bond paper (not curled, folded, or crumpled), plain paper, airmail paper
Notes: .
Printing of envelopes is guaranteed only at room temperature and normal humidity (15
- 25° C (59 - 77° F) ,20- 60%
RI-I).
● Variations in envelope thickness must be less than 0.25 mm (0.0098 in.).
. When inserting envelopes, keep the longer side horizontal.
Table 1-7. Specifications for Continuous Paper (Single Sheet and Multi-Part)
Width
101.6 mm - 254 mm (4.0 in. - 10.0 in.)
Total thickness
0.065 mm - 0.32 mm
(0.0025 in. - 0.012 in.)
Weights
52.3- 82 g/m2 (14 - 22 lb.) — not multi-part
40- 58.2
g/m2 (12 - 15 lb.) — multi-part
Copies
4 sheets (1 original + 3 copies)
Quality
Plain paper, recycled paper, carbonless multi-part paper
1-4
Rev. A