LQ-300 Service Manual
Product
Deacfiption
6.
7.
8.
9.
10.
Table 1-19. Default Options
Font 1 Light Font 2 Light Pause Light
Setting
Go to
Submenu
Blinks
OFF OFF
Character table
Tabie
1-20
Blinks
ON
OFF
Page
iength
Table 1-21
OFF
Blinks
OFF
Skip over perforation
Tabie 1-22
ON
Biinks
OFF Auto tear-off
Tabie
1-22
Biinks
OFF
ON
Graphic print direction
Tabie 1-23
Biinks
ON ON
Software
Tabie 1-24
OFF
Biinks
ON
AGM
Tabie
1-22
ON
Biinks
ON
Auto line feed
Tabie
1-22
Biinks
OFF
Blinks
interface
Table 1-25
Biinks
ON
Blinks Bit rate
Tabie
1-26
OFF
Biinks Blinks
Parity bit
Table 1-27
ON
Biinks
Blinks
Data
iength
Tabie 1-28
Biinks Biinks Blinks
ETWACK
Tabie
1-22
,
Blinks
Biinks OFF
I
State reply
Tabie
1-22
When
you reach the setting you want to change, press the
Pause
button once. The printer
automatically enters the submenu for that setting.
Press the
Font
button to move the through the settings in the submenu.
The
printer beeps
twice each time you press the
Font
button while in a submenu.
When the lights match your desired setting, press the Pause button to make your selection.
The printer saves the new setting and returns to the menu shown above.
Repeat steps 5 through 8 for each additional setting you want to change, or skip to step 10 to
exit the printer’s default setting mode.
When you are finished, turn the printer off. Any settings you have made remain in effect until
you change them
again.
Table 1-20. Character Tables
Font 1 Light
Font 2 Light Pause Light
Standard
Modei
NLSP
Modei
OFF
OFF
OFF
Pc
437
Pc
437
ON
OFF
OFF
PC 850
Pc 650
OFF
ON
OFF Pc 860
PC 864
ON
ON
OFF PC 863
PC 437 Greek
OFF
OFF
ON
PC 865
Pc 652
ON
OFF
ON
Pc 861
PC 853
OFF
ON ON
BRASCII
PC 855
ON
ON
ON
AbicomD
PC 857
OFF
OFF Blinks
—
Pc 866
ON
OFF
Blinks
—
PC 869
OFF
ON
Blinks
—
iSO
Latin IT
ON
ON
Blinks
—
ISO
8859-7
OFF
Blinks Blinks
—
Code MJK
ON
Blinks Blinks
—
Mazowia
Blinks
Blinks Blinks
—
Bulgaria
Rev. A
1-21
To Next Page
Loading...
