Epson LQ 300 - Removing the Upper Housing Assembly

Disassembly and Assembly
LQ-300 Service Manual
3.2.2 Removing the Upper Housing Assembly
1. Remove the printer cover assembly, edge guide assembly, ribbon cartridge, tractor assembly,
platen knob, and optional color upgrade kit.
2. Remove 4 CPB (M4 x 12) screws attaching the upper housing assembly to the lower housing
assembly.
3. Lift off the upper housing assembly.
Upper Housing Assembly
Housing Assembly
Figure 3-3. Removing the Upper Housing Assembly
3.2.2.1 Removing the Eject Roller Assembly
1.
Remove the upper housing assembly ( see Section 3.221).
2. Lift the eject roller assembly up and atan angle from theupperhousing assembly.
Note:
User care when removing the eject ro//erassemb/y, or the 500 g spring may pop out.
‘N
Upper Housing Assembly
~ Eject Roller Assembly
v
= 500g Spring
Figure 3-4. Removing the Eject Roller Assembly
3-6
Rev.A