Epson LQ 300 - Removing the PF Motor

Disassembly and Assembly
LQ-300 Service Manual
3.2.4.1 Removing the PF Motor
1. Remove the printer mechanism (see Section 3.2.4).
2. Remove the platen grounding spring thatsecures theplatenshaft (see Section 3.2.4.3).
3. Remove the CBB (M3 x8) screw attaching the
PFmotorto the nghtframe.
4. Release the clip holding the PF motor assembly from the right frame.
5. Remove the PF motor from the right frame.
PF
Motor “
Figure 3-9. Removing the PF Motor
3-1o
Rev.A