Character Tables
These character tables are selected with the Printer Setting mode or by
using a command.
All tables except the italic character table are the same as the PC437 table
for hex codes 00 through 7F, so only the PC437 table is shown completely.
The rest of the tables show only the characters for hex codes 80
through FF.
The tables with an asterisk (*) after the table name are available in certain
areas only.
PC437 (USA, standard Europe)
PC437
L
Blackberry REV.D
A5 size Appendix
95/05/08
A-20
Appendix
To Next Page
Loading...
