EasyManua.ls Logo

Epson LQ-300+II - Installing the Adobe Acrobat Reader; Accessing the Online Manual

Epson LQ-300+II
242 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cattleya
booklet.fm RevC
A5-Format Booklet.fm
2/27/01 Durchlauf 2
L
Proof-Abzeichnung:
ABE M. Miyagawa, Takahashi_______
Takahashi _______
ABE G. Kok _______
22
Installing the Adobe Acrobat Reader
1. Insert the EPSON printer software CD-ROM into your computers CD-ROM drive.
Windows Me/98/95/2000/NT 4.0:
The setup program on the CD-ROM will be started automatically and displays the
start screen. If the setup program is not started automatically, click the Start button,
then click Run and enter the command E:\Start.exe to start the setup program.
Note:
If your CD-ROM drive has a drive letter other than E, substitute the appropriate
letter.
Windows 3.1x/NT 3.5x:
Select Run from the File menu and enter the command E:\Start.exe to start the
setup program.
Note:
If your CD-ROM drive has a drive letter other than E, substitute the appropriate
letter.
2. Select the preferred language.
3. Select Online manuals, followed by Install Acrobat Reader and follow the on-
screen instructions.
After the Acrobat Reader has been installed on your system, you can access the online
manuals.
Accessing the online manual
The setup program on the CD-ROM offers two possibilities to access the online
manuals: from the CD-ROM or from your computer hard disk.
Note:
Before you can access an online manual from your hard disk, you first have to install
it on your system.
1. Insert the EPSON printer software CD-ROM into your computers CD-ROM drive.
Windows Me/98/95/2000/NT 4.0:
The setup program on the CD-ROM will be started automatically and displays the
start screen. If the setup program is not started automatically, click the Start button,
then click Run and enter the command E:\Start.exe to start the setup program.
Note:
If your CD-ROM drive has a drive letter other than E, substitute the appropriate
letter.
Windows 3.1x/NT 3.5x:
Click Run on the File menu and enter the command E:\Start.exe to start the setup
program.
Note:
If your CD-ROM drive has a drive letter other than E, substitute the appropriate
letter.

Table of Contents

Other manuals for Epson LQ-300+II

Related product manuals