Testing the Printer
WARNING:
Never run
the
self test using paper that is
narrower than 8¼ inches (210 mm or A4 size) because
then the print head prints directly onto the platen.
5.
Press
the AUTO LOAD
button once to automatically load the
paper.
Note: If the platen turns without loading the paper, remove the
paper and re-insert it more firmly; then press the
AUTO LOAD
button again.
Running the self test
The self test can be run in draft mode or Letter Quality mode.
Follow the steps below:
1.
Be sure you have loaded a sheet of paper, as described above.
2. Turn off the printer.
1-16
Setting Up
the
Printer
To Next Page
Loading...
