Epson LQ-510 - Release;Tractor Sensor

REV.-A
DISASSEMBLY, ASSEMBLY, AND ADJUSTMENT
4.2.5.2 Removal of Paper-Feed Motor, Release Lever, and Release/Tractor Sensor
1. Remove the printer mechanism (refer to Section 4.2.4).
2. Disconnect the motor cable from the paper-feed motor.
3. Loosen the two bent tabs on the frame securing the paper-feed motor, and remove the paper-feed motor.
4.
Remove the tractor reduction gear spring, the tractor reduction gear, and the paper-feed reduction
gear.
Frame (R)
.Feed
Motor
Bent Tabs
Figure 4-20. Removal of Paper-Feed Motor
Paper Feed
Reduction Gear
Figure 4-21. Spring and Gear Removal
LQ-510
4-17