REV.-A
GENERAL DESCRIPTION
1.2.2 FIRMWARE SPECIFICATIONS (ESC/P)
Input Data Buffer
Character Code
Character Sets
Family
Font
Printing Mode
Printing Speed
Printing Columns
Character Matrix
Character Size
Control Codes
Printing Direction
ESC/P-84 (Epson Standard Code for Printers)
Bidirectional (text)
Bidirectional (bit-image) (when SW 2-6 is ON and control command [ESC
U 1] input)
Unidirectional (bit-image)
8K bytes (when SW 2-5 is ON)*
1K byte (when SW 2-5 is OFF)
* If DIP SW 2-5 is set to ON, downloading will be ignored.
8-bit
96-character ASCII and 15 international character sets
Epson Roman (Family number: 0)
Epson Sans Serif (Family number: 1)
Epson Roman 10, Epson Roman 12, Epson Roman 15,
Epson Roman Proportional
Epson Sans Serif 10, Epson Sans Serif 12,
Epson Sans Serif 15, Epson Sans Serif Proportional
Epson Draft 10, Epson Draft 12, Epson Draft 15
Selection and mixing of the following modes are allowed (except that 15 cpi
Condensed Mode is not available):
l
Printing quality (draft/letter quality)
0 Character pitch (10, 12, 15, or proportional)
0 Condensed
0 Double-width
0 Double-height
0
Bold
0 Double-strike
0
Italic
0 Underlined
0 Double-underlined
0 Overscore
0 Strike-through
0
Outline
0 Shadow
See Table 1-7.
See Table 1-7.
See Table 1-8.
See Table 1-8.
LQ-510
1-9
To Next Page
Loading...
