Epson LQ-510 - Dip Switches and Jumper Setting; DIP Switch Settings; Table

GENERAL DESCRIPTION
4/3/91
1.4 DIP SWITCHES AND JUMPER SETTING
This section describes the DIP switch selections and jumper setting for the LQ-510 printer.
1.4.1 DIP SWITCH SETTINGS
The two DIP switches for the printer are located on the control panel, and function as shown in Tables 1-11
through 1-15. (Note that the status of the DIP switches is read only at power up or upon receipt of the INIT
signal.)
1-16 LQ-510