A part of the printout of the first sheet is shown below. The
printout of the second sheet is similar to the original self test
described in Chapter 1.
This is the first line.
This is line XX.
3.
The self test continues until the paper runs out or until you press
the ON LINE button. To stop the test, press the ON LINE button.
Note:
To resume the test, press the ON LINE button once more.
4.
To end the self test when paper is loaded, press the LOAD/EJECT
button to eject the paper. Then turn off the printer.
5-10
Using the Printer Options
To Next Page
Loading...
