Epson LQ-510 - User-Defined Characters

Commands Arranged by Topic
User-defined Characters
See Chapter 4 for sample programs and full information on this
topic.
ESC &
Define User-defined Characters
Format:
ASCII code:
ESC & 0 n1 n2 d1
Decimal: 27 38 0 n1 n2 d1
Hexadecimal: 1B
26 00 n1 n2 d1
Comments:
d2 data
d2 data
d2 data
This command allows characters to be redefined in the currently
selected mode.
When defining characters, DIP switch 2-5 must be set to off.
ESC :
Copy ROM to RAM
Format:
ASCII code: ESC : 0 n
0
Decimal: 27 58 0 n
0
Hexadecimal: 1B 3A 00 n
00
Comments:
This sequence copies the characters in ROM to RAM so that
specific characters can be redefined. The variable n represents
the font family. Fonts in font cartridges (except Orator and
Orator-S) can also be copied. The LQ-510 cannot select fonts
2 to 6 if you do not have the multi-font cartridge.
0: Roman
4: Script
1: Sans Serif
5: OCR-B
2: Courier
6: OCR-A
3: Prestige
9-36 Command Summary