Epson LQ-570e - Specifications; Features

EPSON LQ-570e/LQ-580 Revision C
Product Description
S
pecifications
9
1.1 Specifications
This specification outlines the characteristics of a 24 pin serial impact dot matrix printer
LQ-570e/LQ-580.
1.1.1 Features
o Printing Speed
High speed draft 400cps
Draft 300cps
LQ 100cps at 10cpi
o Feeding Method
Friction feed (front, rear)
Push tractor feed (rear)
Push & Pull tractor feed (rear)
Pull tractor feed (front, rear, bottom)
o Feeder
Rear push tractor, CFS Bin1/ Bin2 (Option), Pull tractor (Option)
and Roll paper holder (Option), Front sheet guide (Option)
o Paper / Media
Single sheet, Continuous paper, Multi part paper, Envelop, Card, Label and Roll
Paper.
o Fonts
9LQ & 1 Draft Bitmap and 4 Scalable typefaces
8 Barcode fonts
o Character tables
Standard version 13 tables
NLSP version 39 tables
o Input buffer: 64 Kbytes
o Acoustic noise: 49 dB(A) (ISO 7779 pattern)
o Reliability
Mean print value between failure (MVBF) (MTBF 25% duty circle:
19 million lines (except print head)
MTBF 10000 POH
Print head life 200 million strokes / wire
Ribbon life 2 million characters
o Interface
Bi-directional parallel interface (IEEE-1284 nibble mode supported)
Type B I/F level 2 (Option)
o Control code: ESC/P 2 and IBM 2390 Plus emulation
o Copy capability: 1 original + 4 copies
o Control panel functions
Font, Condensed, Pause, Tear off, Bin, LF/FF, Load/Eject, Micro Adjust, Reset
Self test, Data dump and the default settings