4
Removing the Printed Document From the Push Tractor
Make sure the Tear Off/Bin lights are
flashing. (You may need to press the
Tear Off/Bin button.) This indicates
that your paper is at the current tear-off
position.
Open the paper path guide cover, and
tear off the printed document using the
printer’s tear-off edge.
1 2
Q When you resume printing, the printer
automatically feeds the paper backward
to the top-of-form position, and begins
printing.
Q To feed continuous paper backward
from the tear-off position into the
standby position, press the Load/Eject
button.
To remove the printed document from the push tractor, follow the steps below. To remove labels
or continuous paper from the pull tractor, see Chapter 2 of the User’s Guide.
To Next Page
Loading...
