Problem Solver 143
5
5
5
5
5
5
5
5
5
5
5
5
Wrong tear-off position
You moved the paper using
the knob while the printer was
on.
Adjust the top-of-form position using
the Micro Adjust function. See
“Adjusting the top-of-form position” on
page 64.
c
Caution:
Never use the knob to adjust the top-of-form position; this may damage
the printer or cause it to lose the top-of-form position.
The printer prints on (or too far away from) the perforation of
your continuous paper.
Cause What to do
The tear-off position setting is
incorrect.
Adjust the tear-off position using the
Micro Adjust function. See “Adjusting
the top-of-form position” on page 64.
c
Caution:
Never use the knob to adjust the tear-off position; this may damage the
printer or cause it to lose the tear-off position.
You moved the paper using
the knob while the printer was
on.
Adjust the tear-off position using the
Micro Adjust function. See “Adjusting
the top-of-form position” on page 64.
The printer you want to use is
not selected in your software.
Choose the correct printer from the
Windows desktop or in your application
before printing.
The paper size setting in your
application or printer driver
does not match the size of the
paper you are using.
Check the paper size setting in your
application or printer driver.
To Next Page
Loading...
