196 Options and Consumables
3. Turn on the printer, if necessary.
4. Slide the left edge guide to the triangle mark on the front
paper or front sheet guide. Then adjust the right edge guide
to match the width of your paper.
Note:
You can slide the left edge guide to the left in 1/10-inch increments
to increase the left margin on your printout.
5. Slide the paper printable side up between the edge guides
until it meets resistance. The printer loads the paper
automatically.
Note:
When feeding paper, place your hand flat on the paper and push it to
completely into the feed slot.
3 parts (original + 2 copies) 2
4 parts (original + 3 copies) 3
5 parts (original + 4 copies) 5
Multipart form type Paper-thickness lever position
To Next Page
Loading...
