46 Paper Handling
Note:
If the Tear Off/Bin light is flashing, the paper is in the tear-off
position. If you press the Tear Off/Bin button again, the printer
feeds your paper to the next top-of-form position.
2. Press the Tear Off/Bin button. The printer advances the paper
to the tear-off edge.
c
Caution:
Never use the knob to adjust the tear-off position; this may
damage the printer or cause it to lose the top-of-form position.
Note:
If your paper’s perforation is not properly aligned with the tear-off
edge, you can adjust the tear-off position using the Micro Adjust
function as described in “Adjusting the tear-off position” on page
61.
3. Tear off the printed document using the tear-off edge of the
paper tension unit.
paper perforation
tear-off edge of the paper tension unit
To Next Page
Loading...
