56 Paper Handling
1. Tear off the fresh supply of continuous labels at the
perforation nearest the paper entry slot.
2. Hold down the LF/FF button to eject the remaining labels from
the printer.
c
Caution:
Never feed labels backward using the Load/Eject or Tear
Off/Bin button. When fed backward, labels can easily come off
the backing sheet and cause a paper jam.
Envelopes
You can feed envelopes one at a time using the paper guide, or
you can load multiple envelopes using the optional high-capacity
cut-sheet feeder (bin 1 of the double-bin cut-sheet feeder).
Before loading envelopes, set the paper-thickness lever to a
position 3, 4, or 6 depending on the thickness of the envelopes.
Envelopes can be loaded only in the rear paper slot.
perforation nearest
the paper entry slot
To Next Page
Loading...
