Paper Handling 63
2
2
2
2
2
2
2
2
2
2
2
2
3. Open the paper guide cover, then press the LF/FF button to
feed paper backward, or press the Load/Eject button to feed
paper forward, until the paper perforation is aligned with the
tear-off edge of the paper tension unit.
Note:
The printer has a minimum and a maximum tear-off position. If you
try to adjust the tear-off position beyond these limits, the printer
beeps and stops moving the paper.
4. Tear off the printed pages.
5. Press the Pause button to turn off Micro Adjust mode.
When you resume printing, the printer automatically feeds the
paper back to the top-of-form position and begins printing.
paper perforation
tear-off edge of the paper tension unit
To Next Page
Loading...
