A-10
Enhancing Your Printer With Options
R4C4590
Rev. D
A5 size OPTIONS.FM
3/30/01 Pass 1
L
Proof Sign-off:
Takahashi, Kono _______
Takahashi _______
Hoadley, Courtier _______
7. Push back the paper set levers to clamp the paper against the
guide rollers.
8. Before printing, make sure single sheet feeding is selected.
Also adjust the thickness setting to the paper loaded in the
cut-sheet feeder. See “Adjusting the Paper Thickness Lever”
on page 2-6 for details.
9. In your printer driver software, select your paper size from
the Paper Size list, and select Sheet Feeder Bin-1 from the
Paper Source list. (If you are printing from a DOS application,
select the bin number using the Tear Off/Bin button (LQ-680)
or the Paper Source button (LQ-680Pro) on the control panel.
If you use envelopes or postcards, select Card or Envelope
on the control panel as described in “Using Envelopes” and
“Using Postcards” in Chapter 2.)
The cut-sheet feeder loads paper when you send data to the
printer. You can also load paper by pressing the Load/Eject
button.
To Next Page
Loading...
