Feature name Feature type What to set What to prevent
IPsec/IP filtering You can set to allow
severing and cutting off of
data that is from a certain
client or is a particular type.
Since IPsec protects the
data by IP packet unit
(encryption and
authentication), you can
safely communicate
unsecured printing protocol
and scanning protocol.
Create a basic policy and
individual policy to set the
client or type of data that
can access the device.
Protect unauthorized
access, and tampering and
interception of
communication data to the
device.
SNMPv3 Features are added, such as
monitoring of connected
devices in the network,
integrity of the data to the
SNMP protocol to control,
encryption, user
authentication, etc.
Enable SNMPv3, then set
the authentication and
encryption method.
Ensure change settings via
the network, confidentiality
in state monitoring.
Related Information
& “Configuring the Administrator Password” on page 27
& “Controlling Protocols and Services” on page 28
& “SSL/TLS Communication with the Printer” on page 32
Security Feature Settings
When setting IPsec/IP filtering, it is recommended that you access Web Config using SSL/TLS to communicate
settings information in order to reduce security risks such as tampering or interception.
Configuring the Administrator Password
When you set the administrator password, users other than the administrators will not be able to change the
settings for the system administration. You can set and change the administrator password using Web Config.
Related Information
& “Configuring the Administrator Password Using Web Config” on page 27
Configuring the Administrator Password Using Web Config
You can set the administrator password using Web Config.
A
Access Web Config and select Administrator Settings > Change Administrator Password.
B
Enter a password to New Password and Confirm New Password.
If you want to change the password to new one, enter a current password.
Network Guide
Security Settings
27
To Next Page
Loading...
