Epson LQ-780N - Updating a Self-Signed Certificate

Related Information
& “Accessing Web Config” on page 20
Updating a Self-signed Certificate
If the printer supports the HTTPS server feature, you can update a self-signed certificate. When accessing Web
Config using a self-signed certificate, a warning message appears.
Use a self-signed certificate temporarily until you obtain and import a CA-signed certificate.
A
Access Web Config and select Network Security Settings > SSL/TLS > Certificate.
B
Click Update.
C
Enter Common Name.
Enter an IP address, or an identifier such as an FQDN name for the printer. You can enter between 1 and
128 characters.
Note:
You can separate distinguished name (CN) with commas.
D
Specify a validity period for the certificate.
E
Click Next.
A confirmation message is displayed.
F
Click OK.
The printer is updated.
Network Guide
Security Settings
37