Related Information
& “Configuring Group Policy” on page 40
& “Combination of Local Address(Printer) and Remote Address(Host) on Group Policy” on page 43
& “References of Service Name on Group Policy” on page 43
Combination of Local Address(Printer) and Remote Address(Host) on Group
Policy
Setting of Local Address(Printer)
IPv4
IPv6*
2
Any addresses*
3
Setting of Remote
Address(Host)
IPv4*
1
-
IPv6*
1
*
2
-
Blank
*1: If IPsec is selected for Access Control, you cannot specify in a prefix length.
*2: If IPsec is selected for Access Control, you can select a link-local address (fe80::) but group policy will be disabled.
*3: Except IPv6 link local addresses.
References of Service Name on Group Policy
Note:
Unavailable services are displayed but cannot be selected.
Service Name Protocol type Local port number Remote port
number
Features controlled
Any---All services
ENPC UDP 3289 Any port Searching for a
printer from
applications such as
EpsonNet Config, a
printer driver and the
a scanner driver
SNMP UDP 161 Any port Acquiring and
configuring of MIB
from applications
such as EpsonNet
Config, the Epson
printer driver and the
Epson scanner driver
LPR TCP 515 Any port Forwarding LPR data
RAW (Port9100) TCP 9100 Any port Forwarding RAW data
RAW (Custom Port) TCP 2501(default) Any port Forwarding RAW data
IPP/IPPS TCP 631 Any port Forwarding IPP/IPPS
data
Network Guide
Security Settings
43