1. Open the Utility menu, then click the Bi-D Adjustment icon. To find out how to open the
Utility menu, see “Using the Printer Driver” on page 47. The Bi-D Adjustment window
appears.
2. Click Next.
3. Click Print. The printer prints three sets of adjustment pattern. To see the adjustment pattern,
you need four sheets of A3 size single sheet paper or 12 inch (recommended) continuous paper.
Note:
The image on the right above is an example of good and bad patterns in the print results.
4. Look at the adjustment patterns and find the vertical line that is aligned the best. Then, select
the corresponding line number in the Bi-D Adjustment window.
5. Click Set. The adjustment value will be stored in the printer.
LQ-780/LQ-780N User’s Guide
Printer Software 60
To Next Page
Loading...
