85
Scanning Problems
If the file size is too big . . .
Adjust your scan settings. Try
selecting a lower resolution (dpi), or
scan only part of the image.
If your scanned image is faint or
has gaps . . .
■ Check the brightness. Decrease
the software or drivers brightness
setting.
■ Try adjusting the Gamma setting.
■ Check the condition of your
original. If the document is
damaged, dirty, or wrinkled,
these imperfections will show up
in your scan.
■ Check that the document is
placed flush against the document
table.
To Next Page
Loading...
