Epson Perfection 4490 Photo - Page 61

EPSON Perfection 4490 Photo Revision B
Maintenance Overview 61
Figure 6-1. Lubricating the CR moter Unit
Figure 6-2. Lubricating the Driven Pulley Holder Assy
Figure 6-3. Lubricating the Carriage Lock
Figure 6-4. Lubricating the TPU CR Moter Assy
[Lubrication Point]
Pulley shaft of the CR Motor
Unit
[Lubrication Type]
G-26
[Lubrication Amount]
Adequate dose
[Remarks]
Use a brush to apply it
[Lubrication Point]
Shaft of the Driven Pulley
[Lubrication Type]
G-26
[Lubrication Amount]
Adequate dose
[Remarks]
Use a brush to apply it
Applying Point
Applying Point
Driven Pulley Holder Assy
[Lubrication Point]
Concave portion of the Carriage
Lock
[Lubrication Type]
G-26
[Lubrication Amount]
Adequate dose
[Remarks]
Use a brush to apply it
[Lubrication Point]
A: Idle Pulley shaft on the TPU
CR Motor Assy.
B: Driven Pulley shaft on the
TPU CR Motor Assy.
[Lubrication Type]
G-26
[Lubrication Amount]
Adequate dose
[Remarks]
Use a brush to apply it
Carriage Lock
Applying Point
Applying Point:B Applying Point:A