2
Windows System Requirements
To use your scanner and its software, your system should have:
■
An IBM
®
-compatible PC with a Pentium
®
II-equivalent or faster processor
■
Microsoft
®
Windows
®
98SE (factory installed), Windows Me, Windows 2000, or
Windows XP (factory installed or upgraded from factory-installed Windows 98SE/2000/Me)
■
A minimum of 128MB of RAM (256MB recommended)
■
A minimum of 500MB available hard disk space for installing the software
■
CD-ROM or DVD drive (4× or faster)
■
Built-in USB port
■
SVGA or higher resolution color monitor with 800 × 600 screen resolution or higher and
16-bit color (High Color)
Note: On-screen color and tone reproduction are subject to the display capability of your
computer system, including the video card, monitor, and software. See the documentation
for these products for details.
Macintosh
System Requirements
To use your scanner and its software, your system should have:
■
An Apple
®
Macintosh
®
computer (G3, G4, G5 or iMac
™
), running Mac OS
®
X 10.2.x or
later
Note: Fast User Switching is not supported in Mac OS X 10.3.
Epson Scan does not support the UNIX
®
File System (UFS) for Mac OS X. You must install
Epson Scan on a disk or in a partition that does not use UFS.
■
A minimum of 128MB of RAM (256MB recommended)
■
A minimum of 500MB available hard disk space for installing the software
■
CD-ROM or DVD drive (4× or faster)
■
Available built-in USB port or self-powered, first-tier hub connection
■
SVGA or higher resolution color monitor with 800 × 600 screen resolution or higher and
16-bit color (High Color)
Note: On-screen color and tone reproduction are subject to the display capability of your
computer system, including the video adapter, monitor, and software. See the
documentation for these products for details.
English
Notices_V350.fm Page 2 Wednesday, July 12, 2006 11:34 AM