Epson Perfection V500 Photo - Removing the Upper Housing

EPSON Perfection V500 Photo Revision A
DISASSEMBLY / ASSEMBLY Disassembly Procedure 32
4.2.2 Removing the Upper Housing
1. Remove the TPU Unit. See Section 4.2.1 on page 31.
2. Remove the four C.B.P. M3 x 12 screws that secure the Upper Housing to remove
it.
Figure 4-4. Removing the Upper Housing
Viewed from the outside
Upper Housing
C.B.P. 3 x 12
(7±1 kgf.cm)