Epson Perfection V500 Photo - Removing the Main Board

EPSON Perfection V500 Photo Revision A
DISASSEMBLY / ASSEMBLY Disassembly Procedure 36
4.2.5 Removing the Main Board
1. Release the Carriage Lock. See Section 4.2.3 Step 1
2. Remove the Upper Housing. See Section 4.2.2 on page 32.
3. Move the Carriage Unit to the front of the main unit. See Section 4.2.3 Step 3
4. Remove the Carriage Lock from the Lower Housing.
Figure 4-13. Removing the Carriage Lock
5. Remove the C.B.P. M3 x 8 and C.B.P. M3 x 12 screws that secure the Main Board
Cover.
Figure 4-14. Removing the Main Board Cover (1)
6. Disengage the tab of the Main Board Cover with a flat-blade screwdriver or a
similar tool, and lift the front side of the Main Board Cover.
7. Move the Main Board Cover in the direction of the arrows to disengage the two
tabs, and remove the Main Board Cover.
Figure 4-15. Removing the Main Board Cover (2)
Carriage Lock
Main Board Cover
C.B.P. 3 x 12
(6.5±0.5 kgf.cm)
C.B.P. 3 x 8
(6.5±0.5 kgf.cm)
1
2
Tab
Tab
Main Board Cover