8. Close the scanner cover gently to keep the holder in place.
Parent topic: Placing Film or Slides on the Scanner
Placing 35 mm Slides on the Scanner
You can scan up to twelve 35 mm slides using the slide holder.
Caution: Hold only the edges of the slides or use gloves, or you may damage the film.
Note: Make sure the white areas on the back of the holder are not scratched, dirty, or covered in any
way or the scanner may not correctly detect the holder during scanning. You cannot scan negative
slides.
1. Open the scanner cover.
2. Place up to twelve slides into the slide holder with the shiny sides facing down in the direction
shown.
Note: The images and any wording on the slides should appear backward; the top of the images
should face the open end of the slide holder. Do not cover any of the small holes in the slide holder.
3. Open the scanner cover.
4. Remove the document mat from the scanner cover, if necessary.
29
To Next Page
Loading...
