Epson Perfection4180 Photo - Page 44

EPSON Perfection4180 Photo Revision A
DISASSEMBLY/ASSEMBLY Disassembly Procedure 44
6. Remove the Panel FFC.
When reinstalling the Panel FFC, note the following points.
 Install the Ferrite Core.
Figure 4-23. Ferrite Core
 Orient the silver surface of the Panel FFC toward the bottom.
Figure 4-24. Orientation of Panel FFC
 Attach the Panel FFC to the Attaching position shown in the
Figure 4-24 with the two-sided tape.
Ferrite Core
Sliver surface
Attaching position