28 Printing From an External Device
Disconnecting
Remove the Adapter’s connector from the EXT/IF
port as shown below.
c
Caution:
❏ Do not remove this product while
communicating with another device.
❏ Do not disconnect this product while the
printer is operating. Doing so may cause the
printer to malfunction.
❏ Do not remove this product by pulling on its
upper section. Doing so may damage the
product.
Bluetooth Settings
Use the LCD panel on the printer to make settings for
Bluetooth wireless communication.
& See “Making settings” on page 29
Outline of settings
Setting Choices Description
Bluetooth Device
Name
printer
name-(number)
(Default = 1)
If multiple p rinters
enabled with
Bluetooth are in the
same communication
range, distinguish them
by assigning each
number from 0 through
9.
To make the Device
Name setting take
effect, turn the printer
off and then back on.
To Next Page
Loading...
