Options and Consumable Products 51
Note:
Push the battery all the way into the compartment so
that it locks into place as shown below.
5. Close the battery cover.
Removing the battery
1. Make sure that PictureMate is turned off.
2. Open the battery cover.
3. Move down the battery latch and pull out it.
4. Close the battery cover.
Charging the battery
After installing the battery, charge the battery using
the AC adapter.
1. Make sure that the battery is installed.
2. Connect the power cord and AC adapter, then
plug in PictureMate.
When PictureMate is off, the power light blinks
during charging. When the battery is fully
charged, the power light turns off.
lock
To Next Page
Loading...
