29
4 Connect your camera’s USB cable to your camera
and the EXT. I/F port on the back of
PictureMate.
5 Use your camera’s controls to select and print
photos on PictureMate. (See your camera manual
for instructions.)
6 If you need to adjust any print settings, press
Menu, select Setup, and then select Direct
Print Settings. For more information, see page 58.
7 When you are finished, disconnect your camera
before inserting a memory card in PictureMate.
Printing From an External Drive
If you have saved photos on a CD, flash memory
(thumb) drive, or Zip disk, you can connect the drive to
the back of PictureMate and print just like you do
when you insert a memory card.
You can also print photos from a CD that you get from
a photo processing lab. (Images should be in JPEG or
uncompressed Tiff file format. Some CDs may not
work.)
1 Make sure PictureMate is on.
2 If PictureMate is connected to a computer,
disconnect it or turn off the computer.
To Next Page
Loading...
