Epson PictureMate PM 260 - Setting the Date and Time; Setting Automatic Power On;Off

62
Setting the Date and Time
1 Press the Menu button on the remote control.
2 Select Setup and press OK.
3 Select Date/Time and press OK.
4 Press u or d to change the year, then press r to
move to the month.
5 Repeat step 4 for the month and day, then press
OK.
6 Repeat the process to set the time format and
time, then press OK.
Setting Automatic Power On/Off
You can set times for PictureMate to turn on and off
automatically.
1 Press the Menu button on the remote control.
2 Select Setup and press OK.
3 Select Auto Power Settings and press OK.
4 Press OK to select Power ON Time.
5 Select Setup and press OK. [WHAT IS None FOR?]
6 Set the time and press OK.
7 If you want to set a time for PictureMate to turn off
automatically, repeat steps 1 to 3, then select
Power OFF Time.
8 Repeat steps 5 and 6 to set the time.