Epson PictureMate PM 260 - Changing PictureMate’s Language; Changing Units of Measurement; Adjusting the Screen Brightness; Returning to Default Settings

63
Changing PictureMate’s Language
You can change the language on PictureMate’s screen
to French.
1 Press the Menu button on the remote control.
2 Select Setup and press OK.
3 Select Language and press OK.
4 Select the language you want, then press OK.
Changing Units of Measurement
You can change the units of measurement from inches
to millimeters.
1 Press the Menu button on the remote control.
2 Select Setup and press OK.
3 Select Change Units and press OK.
4 Select the units you want, then press OK.
Adjusting the Screen Brightness
You can make the screen brighter or dimmer.
1 Press the Menu button on the remote control.
2 Select Setup and press OK.
3 Select LCD Brightness Adjustment and press OK.
4 Press u to increase the brightness, or d to reduce
it. You can see your setting reflected in the sample
image.
5 When you’re done, press OK.
Returning to Default Settings
You can return all PictureMate settings to the original
default settings.
1 Press the Menu button on the remote control.
2 Select Setup and press OK.
3 Select Restore Default Settings and press OK.
4 When you see the confirmation, select Yes and
press OK to restore the original settings.
5 Press OK to finish.