Searching by IP Address and Projector name (Advanced Connection Mode only)
42
Searching by IP Address and Projector name (Advanced Connection Mode only)
In the following explanations, unless otherwise noted, Windows screen
shots are used.
You see the similar screens even when using Macintosh.
Procedure
A Click "Manual search" on the EasyMP Network Projection
Select a projector screen. Click "Manual search".
B Enter the IP address or the Projector name for the projector
you want to connect to, and click "OK".
The search results are displayed on the EasyMP Network Projec-
tion Select a projector screen.
Provided the target projector has been identified, select that projec-
tor, and then click Connect to establish a connection.
When you will always be using that projector, save the search as a
Profile, so that you do not have to specify the relevant details every
time you perform a search. s p.43
q
When using Manual search in Quick Connection Mode, you can specify
the SSID. When there are a lot of projectors you can narrow the search field
by using SSID.
To Next Page
Loading...
