20 Setting Up the Projector
Connecting an S-Video Source
1. Locate an S-Video cable (one may have been provided with your
video equipment, or you can purchase one from Epson; see
page 14).
2. Connect the cable between the S-Video connector on your player
and the
S-Video connector on the projector:
3. If you want to play sound through the projector, see page 27 for
instructions on connecting an audio cable.
4. If you don’t need to make any other connections, see Chapter 2
or the Quick Setup sheet for instructions on turning on the
projector and adjusting the image.
To Next Page
Loading...
