Setting Up the Projector 25
Connecting to the Computer Port
Follow these instructions:
1. Locate the VGA computer cable provided with the projector.
2. Connect one end to the projector’s
Computer port, and the other
end to your computer’s monitor port.
3. Optionally, you can connect an external monitor (see page 26),
and play sound through the projector (see page 27).
4. When you’ve finished making connections, see Chapter 2 for
instructions on turning on the projector and adjusting the image.
5. Once the projector is turned on, enter the projector’s Signal menu
and make sure Computer1 is set to
Auto; see page 56.
caution
Don’t try to force a
connector to fit a port with a
different shape or number of
pins. You may damage the
port or connector.
To Next Page
Loading...
