36 Projecting
Adjusting the Height of Your Image
If the image is too low on the screen, you can use the front adjustable
feet to raise it.
1. Lift the front of the projector and turn the front feet to adjust the
position of the projected image.
2. If necessary, you can fine-tune the height by turning the
projector’s front feet without lifting the front of the projector.
Raising the projector causes the image to become “keystone” shaped,
but you can correct the distortion by pressing the or buttons
on the projector as described in the next section.
Turn to adjust
image height
To Next Page
Loading...
