58 Configuring the Projector
■ Video Signal (composite and S-Video)
Leave this setting at
Auto unless you are using a 60-Hz PAL
system (select
PAL60).
■ Aspect (video)
Sets the image’s aspect ratio (ratio of width to height). Select
4:3 for normal computer content, 4:3 for letterbox video
content,
16:9 for widescreen video content, or 16:9 (Up) or
16:9 (Down) for video content with subtitles or supertitles.
3. When you’re finished, press
Esc or Menu.
Customizing Projector Features
The Settings menu lets you customize the way you use the projector,
from adjusting lamp brightness and speaker volume to changing the
shape of the pointer.
1. Press the
Menu button on the remote control, highlight
Settings, then press the Enter button to select the Settings menu.
2. Use the pointer button to highlight menu items, then press
the
Enter button to select from any of the following options:
■ Keystone
Adjusts a distorted image from a trapezoid shape to
rectangular when the projector is tilted up or down.
To Next Page
Loading...
