Epson PowerLite 6110i - Installing the Network Software; System Requirements; Installing the Software

74 Monitoring the Projector Over a Network
Installing the Network Software
The projector software CD-ROM includes EMP Monitor for
monitoring your projector from a remote location.
System Requirements
Before you install the software, make sure your computer meets these
requirements:
■ Microsoft
®
Windows 98SE, Me, 2000 (SP4), XP, or Windows
Vista™ 32-bit
■ IBM
®
compatible PC with at least a Pentium
®
III 1.2 GHz
processor
■ At least 256MB of RAM (512MB recommended)
■ At least 128MB of free hard disk space
■ XGA (1024 × 768) or better display adapter and monitor, 16-bit
color or higher
Installing the Software
1. Insert the projector software CD-ROM in your computer’s
CD-ROM or DVD drive.
2. Follow the on-screen instructions to install the software.
Once installed, you can access EMP Monitor from your computer’s
Start menu.
note
The Easy Management
software cannot be installed
on Macintosh systems.
note
If you need to uninstall
the software, use the
Add/Remove Programs
utility in the Windows
Control Panel.