Solving Problems 95
If none of the suggestions solves your problem, see additional
solutions to problems in the following sections.
Checking Projector Status
If your projector isn’t working correctly, first turn it off, wait for it to
cool (the P Power light stops flashing orange), and unplug it. Then
plug the power cord back in and turn on the projector. If this doesn’t
solve the problem, check the lights on top of the projector.
What To Do When the Lights Flash
The lights on top of the projector indicate the projector’s status and
let you know when a problem occurs.
Refer to the following table for a complete description of the
projector’s status lights and their meaning:
Temperature lightLamp lightPower light
Filter light
Light Status Description
Orange The projector is in sleep mode. You can unplug it or press the Power
button to turn it on.
Flashing green The projector is warming up. Wait for the image to appear.
Green The projector is operating normally.
Red
Flashing orange
High Temperature Warning. Although this is not an abnormal condition,
projection will stop automatically if the temperature rises too high again.
Make sure there is plenty of space around and under the projector for
ventilation, and that the air filter is clean (see page 87).
To Next Page
Loading...
