43
English
B Attach the cable cover to the projector
Attach the cable cover ( ) and use a cross-head screwdriver to tighten the screws (x2) and secure the
cable cover ( ).
Only a specialist should remove or reinstall the projector, including for maintenance and
repairs. Refer to your projector’s User’s Guide for instructions on maintenance and repairs.
❏ Never loosen the bolts and nuts after installation. If you find any loose screws, tighten
them firmly. Otherwise, the projector or wall mount may fall and cause personal injury or
property damage.
❏ Do not hang on the wall mount or hang a heavy object on the wall mount. If the projector
or wall mount falls, it could cause personal injury or property damage.
To Next Page
Loading...
