INSTALLATION
HANDBOOK
Maintenance
2
Epson PowerLite 8350 / 8700 UB
5. Insert the screwdriver that came with the lamp (or a similar tool) into the slot on the back
of the projector to release the lamp cover. Then lift up the cover to remove it.
6. Loosen the two screws securing the lamp (they don’t come all the way out).
7. Grasp the lamp as shown and pull it straight out.
WARNING: The lamp(s) in this product contain mercury. Please consult your state and
local regulations regarding disposal or recycling. Do not put in the trash.
To Next Page
Loading...
