3. To prevent changes to network settings, select Network Protect, press Enter, select On, press
Enter again, and press Esc (PowerLite 93/95/96W/905/915W/935W/1835).
You can attach the Password Protect sticker to the projector as an additional theft deterrent.
Note: Be sure to keep the remote control in a safe place; if you lose it, you will not be able to enter the
password required to use the projector.
Parent topic: Password Security Types
Entering a Password to Use the Projector
If a password is set up and a Power On Protect password is enabled, you see a prompt to enter a
password whenever you turn on the projector.
You must enter the correct password to use the projector.
101
To Next Page
Loading...
