165
Setting Options Description
Standby Mode Communication On
Communication Off
Communication On indicates
that the projector can be
monitored over a network when
the projector is in standby mode
Enable this setting to allow the
following operations to occur
when the projector is in standby
mode:
• Monitor and control the
projector over a network
• Communication from the
HDBaseT port (Control
Communications must be set
to On)
ECO Display On
Off
Displays a leaf icon in the bottom
left corner of the projected screen
to indicate the power-saving
status when the lamp brightness
changes
Parent topic: Adjusting the Menu Settings
To Next Page
Loading...
