110
1. Turn on the projector and display an image.
2. To enlarge the image size, press the W (Wide) button on the projector's control panel.
3. To reduce the image size, press the T (Tele) button.
After you adjust the image size, the Image Shift screen is displayed automatically for adjusting the
image position.
Note: If the projector is installed out of reach, you can also adjust the image size with the remote
control using the Digital Zoom setting in the projector menus.
Parent topic: Using Basic Projector Features
Adjusting the Image Position Using Screen Position
You can adjust the image position if there are margins between the edge of the image and the projected
screen frame.
Note: This feature is not available if you set the Screen Type setting to the same aspect ratio as the
projector's native resolution.
1. Turn on the projector and display an image.
2. Press the Menu button on the control panel or remote control.
To Next Page
Loading...
